-
Two
headlights, diameter of each light: 100mm
-
2 x 55W/60W halogen bulbs
-
High-quality,
conducting aluminium for higher performance
-
Complete
unit weighs approx. 400g, lighter than the
original headlight
-
Easy
to install, no electrical/ vehicle modifications
-
Unit
is screwed to the bike using the existing
mounting points
-
Headlight
range adjustment is maintained.
-
Increased
security if one bulb fails !
-
For
the real enduro look
Fitting
Instructions:
1. Unscrew the 3 retaining scews, holding the
standard unit in place.
2.
Remove the black plastic retaing frame and ease
out the standard light fitting.
3.
Dissconect the leads from the back of the bulb
and attach them to the twin headlight unit.
4.
fit the twin headlight and replace the plastic
retaing frame.
5.
Finally replace the 3 screws and tighten to secure
the whole unit.
Made
by Touratech
Supplier:
Bracken Motorcycles
|
